17,000 £
Make an offerContact us to receive an offer.
| ------------------- | |
| worked hours | |
| hours under power | |
| state | Not specified |
| At local norms | --------- |
| status | |
| Datasheet | CZECH / TOS Svitavy FWP 225 U |
| Last availability date | 23/04/2026 |
This listing is for a CZECH / TOS SVITAVY multihead moulding machine, model FWP 225 U, manufactured in 1993. The machine is designed for precision moulding tasks and features six spindles with a spindle diameter of 40 mm and an axial spindle adjustment range of 30 mm. It offers a spindle speed of up to 6000 rpm, supporting efficient operation for various workpiece sizes.
The machine accommodates workpieces with a maximum height of 120 mm and a minimum height of 6 mm. It handles workpiece widths ranging from 15 mm to 220 mm, with minimum lengths of 300 mm for through-feed and 650 mm for single-piece processing. Motor power is distributed with 4 kW motors on the 1st, 2nd, 3rd, 5th, and 6th spindles, while the 4th spindle is powered by a 7.5 kW motor. The feed rate ranges between 15 and 25 meters per minute, providing flexibility in processing speeds.
The machine's dimensions are approximately 3490 x 1910 x 1740 mm, and it weighs around 3400 kg. It features an enclosed upper section and a control panel equipped with multiple buttons and switches for operational control. A large electric motor is mounted on the left side, protected by a cover. The machine includes a conveyor or feed system extending from the right side, complete with conveyor guide rails to facilitate material handling.
Visible components include several orange adjustment handles and black knobs for precise machine settings. Two large flexible yellow hoses are connected to the upper section, likely serving dust extraction or ventilation purposes. A yellow control pendant with up and down arrow buttons and a red emergency stop button is attached near the conveyor, enhancing operational safety and convenience.
The interior of the machine shows multiple rollers, adjustment knobs, pneumatic hoses, and two large black gears mounted vertically, all appearing clean and intact. Overall, the machine is well-maintained with no visible rust, damage, or wear, indicating careful upkeep. It has not been used since an overhaul performed in 2005. Delivery can be arranged immediately, with payment required prior to pickup.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
> The machine is in EXCELLENT CONDITION and FULLY FUNCTIONAL
It has not been used since the overhaul
> Overhaul performed in 2005 (the machine has not been in operation since the overhaul)
> Shaft assembly:
1-lower / 2-right / 3-left / 4-upper / 5-lower / 6-universal
> Max. workpiece height: 120 mm
> Min. workpiece height: 6 mm
> Max. workpiece width: 220 mm
> Min. workpiece width: 15 mm
> Min. workpiece length (through-feed): 300 mm
> Min. workpiece length (single): 650 mm
> Number of spindles: 6
> Spindle diameter: 40 mm
> Axial spindle adjustment: 30 mm
> Spindle speed: 6000 rpm
> Motor power (1st, 2nd, 3rd, 5th, 6th): 4 kW
> Motor power (4th): 7.5 kW
> Feed rate: 15–25 m/min
> Machine dimensions: 3490 x 1910 x 1740 mm
> Machine weight: 3400 kg
> Delivery: immediately
> Payment: prior to pickup
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | April 23, 2026 |
> The machine is in EXCELLENT CONDITION and FULLY FUNCTIONAL
It has not been used since the overhaul
> Overhaul performed in 2005 (the machine has not been in operation since the overhaul)
> Shaft assembly:
1-lower / 2-right / 3-left / 4-upper / 5-lower / 6-universal
> Max. workpiece height: 120 mm
> Min. workpiece height: 6 mm
> Max. workpiece width: 220 mm
> Min. workpiece width: 15 mm
> Min. workpiece length (through-feed): 300 mm
> Min. workpiece length (single): 650 mm
> Number of spindles: 6
> Spindle diameter: 40 mm
> Axial spindle adjustment: 30 mm
> Spindle speed: 6000 rpm
> Motor power (1st, 2nd, 3rd, 5th, 6th): 4 kW
> Motor power (4th): 7.5 kW
> Feed rate: 15–25 m/min
> Machine dimensions: 3490 x 1910 x 1740 mm
> Machine weight: 3400 kg
> Delivery: immediately
> Payment: prior to pickup
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| worked hours | |
| hours under power | |
| state | Not specified |
| At local norms | --------- |
| status | |
| Datasheet | CZECH / TOS Svitavy FWP 225 U |
| Last availability date | 23/04/2026 |
This listing is for a CZECH / TOS SVITAVY multihead moulding machine, model FWP 225 U, manufactured in 1993. The machine is designed for precision moulding tasks and features six spindles with a spindle diameter of 40 mm and an axial spindle adjustment range of 30 mm. It offers a spindle speed of up to 6000 rpm, supporting efficient operation for various workpiece sizes.
The machine accommodates workpieces with a maximum height of 120 mm and a minimum height of 6 mm. It handles workpiece widths ranging from 15 mm to 220 mm, with minimum lengths of 300 mm for through-feed and 650 mm for single-piece processing. Motor power is distributed with 4 kW motors on the 1st, 2nd, 3rd, 5th, and 6th spindles, while the 4th spindle is powered by a 7.5 kW motor. The feed rate ranges between 15 and 25 meters per minute, providing flexibility in processing speeds.
The machine's dimensions are approximately 3490 x 1910 x 1740 mm, and it weighs around 3400 kg. It features an enclosed upper section and a control panel equipped with multiple buttons and switches for operational control. A large electric motor is mounted on the left side, protected by a cover. The machine includes a conveyor or feed system extending from the right side, complete with conveyor guide rails to facilitate material handling.
Visible components include several orange adjustment handles and black knobs for precise machine settings. Two large flexible yellow hoses are connected to the upper section, likely serving dust extraction or ventilation purposes. A yellow control pendant with up and down arrow buttons and a red emergency stop button is attached near the conveyor, enhancing operational safety and convenience.
The interior of the machine shows multiple rollers, adjustment knobs, pneumatic hoses, and two large black gears mounted vertically, all appearing clean and intact. Overall, the machine is well-maintained with no visible rust, damage, or wear, indicating careful upkeep. It has not been used since an overhaul performed in 2005. Delivery can be arranged immediately, with payment required prior to pickup.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | April 23, 2026 |
Многовретенна четиристранна машина CZECH / TOS SVITAVY FWP 225 U
Čtyřstranná hoblovka / TOS Svitavy / FWP 225 U
CZECH / TOS SVITAVY FWP 225 U Fler-spindlet firsidet høvl
CZECH / TOS SVITAVY FWP 225 U Mehrspindel-Kehlmaschine
Πολυκέφαλη μηχανή μορφοποίησης ξύλου CZECH / TOS SVITAVY FWP 225 U
CZECH / TOS SVITAVY FWP 225 U Multihead moulder
Moldurera de múltiples cabezales CZECH / TOS SVITAVY FWP 225 U
Moulurière multi-têtes CZECH / TOS SVITAVY FWP 225 U
Viševretena blanjalica-profilirka CZECH / TOS SVITAVY FWP 225 U
CZECH / TOS SVITAVY FWP 225 U Többorsós gyalugép
Scorniciatrice multi-mandrino CZECH / TOS SVITAVY FWP 225 U
CZECH / TOS SVITAVY FWP 225 U Daugiaverpstė keturpusė obliavimo staklė
CZECH / TOS SVITAVY FWP 225 U Meerassige vierzijdige schaafmachine
Wielowrzecionowa strugarko-frezarka CZECH / TOS SVITAVY FWP 225 U
Moldureira de múltiplos cabeçotes CZECH / TOS SVITAVY FWP 225 U
Mașină de rindeluit și profilat cu mai multe arbori CZECH / TOS SVITAVY FWP 225 U
CZECH / TOS SVITAVY FWP 225 U Многоголовочный четырёхсторонний станок
Viševretena četvorostrana mašina CZECH / TOS SVITAVY FWP 225 U
CZECH / TOS SVITAVY FWP 225 U Flerspindlig fyrsidig hyvel
Çok milli profil makinesi CZECH / TOS SVITAVY FWP 225 U
EN
- Languages
English (EU)