Price on request
Make an offerContact us to receive an offer.
| ------------------- | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | visible |
| Last availability date | 23/01/2026 |
This continuous carousel polyurethane casting line, manufactured in 2015, is a comprehensive industrial installation designed for producing flat polyurethane parts through a low-pressure casting process. It enables continuous or semi-continuous production with minimal labor, requiring only two operators, while emphasizing automation, process stability, and high production capacity.
The system integrates equipment from multiple manufacturers, resulting in a custom-built line without a single machine nameplate. It has proven effective under real production conditions.
The line operates on a flexible continuous carousel featuring rotating platforms driven by a chain conveyor. Key integrated stations include a low-pressure casting machine capable of handling three main components plus three simultaneous additives, in-line degassing units for these components, a continuous conveyor system, heating tunnels totaling 24 meters in length with a maximum temperature of 150°C, a demoulding station, a mold cleaning station utilizing a brush system, and an automatic release agent application station.
This configuration allows precise control over curing times, adjustable from 15 to 40 minutes depending on line speed, with the option for longer curing in semi-continuous mode. The line supports casting parts weighing from approximately 2.7 kg up to 75 kg in standard operation, with a theoretical maximum single casting of up to 200 kg depending on the formulation. The practical casting capacity can reach up to 1 ton per hour, with a theoretical weekly output of 76 tons.
Mold specifications include a maximum weight of 500 kg and maximum tooling dimensions of 1450 × 1020 × 400 mm. The system accommodates single or multi-cavity molds, with or without automatic removable covers, and supports top-side casting. Finished parts can measure up to approximately 1420 × 1000 × 390 mm, accounting for about 2% shrinkage.
The production environment is an industrial indoor setting with a concrete floor and high ceiling. The machinery and surrounding area appear clean and well maintained. The line includes multiple connected units with white enclosures and yellow ventilation units on top, visible piping and ductwork, metal staircases with railings, and a yellow overhead crane system. Conveyor tables display multiple colored plastic sheet samples, indicating the line's application in plastic sheet production.
This line is ideal for manufacturing large technical flat polyurethane components in medium to high-volume industrial production, ensuring consistent quality and throughput with reduced labor requirements.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This continuous carousel polyurethane casting line is a complete industrial installation designed for the manufacturing of flat polyurethane parts using a low-pressure casting process.
The line enables continuous or semi-continuous production with only two operators, combining high automation, process stability, and significant production capacity.
The system results from the integration of equipment supplied by several manufacturers, which explains the absence of a single machine nameplate. It is a custom-built industrial line, proven in real production conditions.
Operating Principle
The line is based on a flexible continuous carousel composed of rotating platforms driven by a chain conveyor, integrating the following stations:
Low-pressure casting machine (3 main components + 3 simultaneous additives)
with in-line degassing units for the three main components
Continuous conveyor system
Heating tunnels with a total length of 24 meters, maximum temperature 150°C
Demoulding station
Mold cleaning station (brush system)
Automatic release agent application station
This configuration allows precise control of curing times and stable continuous production. Extended curing times can be managed in semi-continuous mode.
Capacity & Dimensions
Cast part weight:
minimum: approx. 2.7 kg (depending on formulation)
maximum in standard operation: 75 kg per part
theoretical maximum single casting: up to 200 kg (recipe-dependent)
Production capacity:
theoretical hourly output: up to 900 kg/h
practical casting capacity: up to 1 t/h
theoretical weekly output: 76 tons
Molds:
maximum mold weight: 500 kg
maximum tooling dimensions: 1450 × 1020 × 400 mm
single or multi-cavity molds
with or without automatic removable cover
top-side casting
Finished part dimensions:
up to 1420 × 1000 × 390 mm (approx. 2% shrinkage)
Curing Time Management
adjustable curing time from 15 minutes (maximum line speed)
to 40 minutes (minimum line speed)
longer curing times achievable in semi-continuous casting mode
Automation & Operation
continuous production with only two operators
automated mold preparation, casting, heating, demoulding, cleaning, and release agent application
design focused on process repeatability, productivity, and reduced labor requirements
Typical Applications
flat polyurethane parts
large technical components
medium to high-volume industrial production requiring consistent quality and throughput
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Jan. 25, 2026 |
This continuous carousel polyurethane casting line is a complete industrial installation designed for the manufacturing of flat polyurethane parts using a low-pressure casting process.
The line enables continuous or semi-continuous production with only two operators, combining high automation, process stability, and significant production capacity.
The system results from the integration of equipment supplied by several manufacturers, which explains the absence of a single machine nameplate. It is a custom-built industrial line, proven in real production conditions.
Operating Principle
The line is based on a flexible continuous carousel composed of rotating platforms driven by a chain conveyor, integrating the following stations:
Low-pressure casting machine (3 main components + 3 simultaneous additives)
with in-line degassing units for the three main components
Continuous conveyor system
Heating tunnels with a total length of 24 meters, maximum temperature 150°C
Demoulding station
Mold cleaning station (brush system)
Automatic release agent application station
This configuration allows precise control of curing times and stable continuous production. Extended curing times can be managed in semi-continuous mode.
Capacity & Dimensions
Cast part weight:
minimum: approx. 2.7 kg (depending on formulation)
maximum in standard operation: 75 kg per part
theoretical maximum single casting: up to 200 kg (recipe-dependent)
Production capacity:
theoretical hourly output: up to 900 kg/h
practical casting capacity: up to 1 t/h
theoretical weekly output: 76 tons
Molds:
maximum mold weight: 500 kg
maximum tooling dimensions: 1450 × 1020 × 400 mm
single or multi-cavity molds
with or without automatic removable cover
top-side casting
Finished part dimensions:
up to 1420 × 1000 × 390 mm (approx. 2% shrinkage)
Curing Time Management
adjustable curing time from 15 minutes (maximum line speed)
to 40 minutes (minimum line speed)
longer curing times achievable in semi-continuous casting mode
Automation & Operation
continuous production with only two operators
automated mold preparation, casting, heating, demoulding, cleaning, and release agent application
design focused on process repeatability, productivity, and reduced labor requirements
Typical Applications
flat polyurethane parts
large technical components
medium to high-volume industrial production requiring consistent quality and throughput
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | visible |
| Last availability date | 23/01/2026 |
This continuous carousel polyurethane casting line, manufactured in 2015, is a comprehensive industrial installation designed for producing flat polyurethane parts through a low-pressure casting process. It enables continuous or semi-continuous production with minimal labor, requiring only two operators, while emphasizing automation, process stability, and high production capacity.
The system integrates equipment from multiple manufacturers, resulting in a custom-built line without a single machine nameplate. It has proven effective under real production conditions.
The line operates on a flexible continuous carousel featuring rotating platforms driven by a chain conveyor. Key integrated stations include a low-pressure casting machine capable of handling three main components plus three simultaneous additives, in-line degassing units for these components, a continuous conveyor system, heating tunnels totaling 24 meters in length with a maximum temperature of 150°C, a demoulding station, a mold cleaning station utilizing a brush system, and an automatic release agent application station.
This configuration allows precise control over curing times, adjustable from 15 to 40 minutes depending on line speed, with the option for longer curing in semi-continuous mode. The line supports casting parts weighing from approximately 2.7 kg up to 75 kg in standard operation, with a theoretical maximum single casting of up to 200 kg depending on the formulation. The practical casting capacity can reach up to 1 ton per hour, with a theoretical weekly output of 76 tons.
Mold specifications include a maximum weight of 500 kg and maximum tooling dimensions of 1450 × 1020 × 400 mm. The system accommodates single or multi-cavity molds, with or without automatic removable covers, and supports top-side casting. Finished parts can measure up to approximately 1420 × 1000 × 390 mm, accounting for about 2% shrinkage.
The production environment is an industrial indoor setting with a concrete floor and high ceiling. The machinery and surrounding area appear clean and well maintained. The line includes multiple connected units with white enclosures and yellow ventilation units on top, visible piping and ductwork, metal staircases with railings, and a yellow overhead crane system. Conveyor tables display multiple colored plastic sheet samples, indicating the line's application in plastic sheet production.
This line is ideal for manufacturing large technical flat polyurethane components in medium to high-volume industrial production, ensuring consistent quality and throughput with reduced labor requirements.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Jan. 25, 2026 |
Автоматизирана линия за непрекъснато леене на полиуретан – Гъвкава каруселна система (до 75 кг / 1 т/ч)
Automatizovaná linka pro kontinuální odlévání polyuretanu – flexibilní karuselový systém (až 75 kg / 1 t/h)
Automatiseret kontinuerlig polyurethanstøbelinje – Fleksibelt karruselsystem (op til 75 kg / 1 t/t)
Automatisierte, kontinuierliche Polyurethan-Gießanlage – Flexibles Karussellsystem (bis zu 75 kg / 1 t/h)
Αυτοματοποιημένη Γραμμή Συνεχούς Χύτευσης Πολυουρεθάνης – Ευέλικτο Σύστημα Carousel (Έως 75 kg / 1 t/h)
Automated Continuous Polyurethane Casting Line – Flexible Carousel System (Up to 75 kg / 1 t/h)
Línea automatizada de colada continua de poliuretano – Sistema de carrusel flexible (hasta 75 kg / 1 t/h)
Ligne de coulée continue automatisée de polyuréthane – Système carrousel flexible (jusqu'à 75 kg / 1 t/h)
Automatizirana linija za kontinuirano lijevanje poliuretana – fleksibilni karuselni sustav (do 75 kg / 1 t/h)
Automatizált folyamatos poliuretán öntősor – Rugalmas körhinta rendszer (akár 75 kg / 1 t/h-ig)
Linea di colata continua automatizzata di poliuretano – Sistema a carosello flessibile (fino a 75 kg / 1 t/h)
Automatinė nepertraukiamo veikimo poliuretano liejimo linija – lanksti karuselinė sistema (iki 75 kg / 1 t/h)
Geautomatiseerde continue polyurethaan gietlijn – Flexibel carrouselsysteem (tot 75 kg / 1 t/u)
Automatyczna linia do ciągłego odlewania poliuretanu – elastyczny system karuzelowy (do 75 kg / 1 t/h)
Linha automatizada de moldagem contínua de poliuretano – Sistema de carrossel flexível (até 75 kg / 1 t/h)
Linie automată de turnare continuă a poliuretanului – Sistem flexibil de carusel (până la 75 kg / 1 t/h)
Автоматизированная линия непрерывного литья полиуретана – гибкая карусельная система (до 75 кг / 1 т/ч)
Automatizovana linija za kontinuirano livenje poliuretana – fleksibilni karuselni sistem (do 75 kg / 1 t/h)
Automatiserad kontinuerlig polyuretangjutningslinje – Flexibelt karusellsystem (upp till 75 kg / 1 t/h)
Otomatik Sürekli Poliüretan Döküm Hattı – Esnek Döner Tabla Sistemi (75 kg / 1 t/saate kadar)
English (EU)
English (GB)