Price on request
View priceContact us to receive an offer.
| ------------------- | |
| Length x width x height | 11993.0 × 2480.0 × 3275.0 |
| Weight | 50284.26 lb |
| worked hours | 7062 hours |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 31/01/2026 |
The Sandvik DI500 is a crawler-mounted drilling rig designed for demanding drilling operations. Manufactured in 2007, this robust machine measures 11,993 mm in length, 2,480 mm in width, and 3,275 mm in height, with a total weight of 22,815 kg. It features a tracked undercarriage, providing excellent mobility on rough and uneven terrain, as observed in outdoor working environments with rocky and dirt ground conditions.
The drilling rig is equipped with a tall drill mast that extends vertically and is supported by hydraulic cylinders, allowing precise control during drilling operations. Hydraulic drill components are integrated into the mast to facilitate efficient drilling performance. Access to the operator's cabin is provided via a metal ladder, and the cabin includes glass windows for visibility and protection.
The DI500's tramming system is powered by hydraulic axial piston motors with 3-stage planetary gears and integrated safety brakes, delivering a tractive force of 140 kN. It offers two tramming speeds: 0 to 2.4 km/h in first gear with a gradeability of 36.5° (74%), and 0 to 4 km/h in second gear with a gradeability of 17° (32%). The ground contact length of the tracks is 2,740 mm with a track gauge of 2,050 mm and track plate width of 350 mm, providing stable operation with a ground pressure of 104.9 kN/m² and ground clearance of 350 mm.
The powerpack includes a water-cooled, turbocharged CAT C11 ACERT diesel engine delivering 287 kW at 2,100 rpm, meeting Tier 3 and Stage IIIA emission standards. This 6-cylinder engine features low fuel consumption and noise levels. Hydraulic systems consist of multiple pumps from Rexroth and Sauer-Danfoss, operating at pressures up to 320 bar for tramming motors and 250 bar for cylinders, ensuring reliable and efficient hydraulic performance.
Overall, the Sandvik DI500 crawler drill rig is a well-equipped and powerful machine suitable for challenging drilling tasks, with visible components and structural features supporting its rugged functionality.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Track gauge [mm] 2050
Track plate width [mm] 350
Ground contact length [mm] 2740
Ground pressure [kN/m2] 104,9
Ground clearance [mm] 350
Track oscillation [°] +/- 10
The hydraulic axial piston type tramming motors are equipped with 3-stage planetary gears in the hub of the driving wheel with integrated, spring loaded, multiple disc safety brakes.
Tractive force [kN] 140
Gradeability, 1st gear [° or %] 36,5 or 74
Tramming speed, 1st gear [km/h] 0...2,4
Gradeability, 2nd gear [° or %] 17 or 32
Tramming speed, 2nd gear [km/h] 0...4
An in-line mounted powerpack consisting of a diesel engine, hydraulic pumps and air compressor is mounted on a robust steel frame.
Diesel engine.
The DI 500 is equipped with a water-cooled, turbo charged, 4-cycle direct injected CAT diesel engine. It is equipped with an air purification system and fulfills exhaust gas emission standards Meets TIER 3, Stage III a emission requirements. Tier 3 refers to EPA (U.S.) standards. Stage IIIA refers to European standards. The engine features low fuel consumption, low noise level and has long service intervals for efficient and environmentally friendly operation.
Manufacturer and type CAT C11 ACERT
Type of cooling system water-cooled
Power output (SAE) [kW/rpm] 287/2100
Number of cylinders 6
Displacement/stroke [cm3] 11094
Max. torque and Rotation speed [Nm/rpm] 1187/2100
Specific fuel consumption [g/kWh] 235
Low idle speed [rpm] 800
Hydraulic pumps.
The hydraulic gear pumps are powered through an engine-integrated gearbox. Gear pumps are simple in construction and easy to maintain with low filtration requirements.
A double axial pump for tramming motors, rotation motor, feed motor, dust collector:
Manufacturer and type REXROTH:
Displacement [l/min] 126,126
Max. Pressure [bar] 320,320
A double gear pump for hydraulic oil cooler, compressor oil cooler, water cooler, SLU 22 oiler:
Manufacturer and type SAUER - DANFOSS
Displacement [l/min] 50,50
Max. Pressure [bar] 250,250
A gear pump for hydr. cylinders, magazine functions and pilot lines:
Manufacturer and type SAUER - DANFOSS
Displacement [l/min] 32
Max. pressure [bar] 200
Operating pressure settings in the hydraulic system are:
Tramming motors [bar] 320
Rotation motor [bar] 180
Feed motor [bar] 200
Dust collector fan motor [bar] 165
Hydraulic oil cooler [bar] 180
Compressor oil cooler [bar] 180
Water cooler [bar] 210
Hydraulic control system [bar] 35
Cylinders [bar] 250
Pipe changer [bar] 180
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | May 6, 2026 |
Track gauge [mm] 2050
Track plate width [mm] 350
Ground contact length [mm] 2740
Ground pressure [kN/m2] 104,9
Ground clearance [mm] 350
Track oscillation [°] +/- 10
The hydraulic axial piston type tramming motors are equipped with 3-stage planetary gears in the hub of the driving wheel with integrated, spring loaded, multiple disc safety brakes.
Tractive force [kN] 140
Gradeability, 1st gear [° or %] 36,5 or 74
Tramming speed, 1st gear [km/h] 0...2,4
Gradeability, 2nd gear [° or %] 17 or 32
Tramming speed, 2nd gear [km/h] 0...4
An in-line mounted powerpack consisting of a diesel engine, hydraulic pumps and air compressor is mounted on a robust steel frame.
Diesel engine.
The DI 500 is equipped with a water-cooled, turbo charged, 4-cycle direct injected CAT diesel engine. It is equipped with an air purification system and fulfills exhaust gas emission standards Meets TIER 3, Stage III a emission requirements. Tier 3 refers to EPA (U.S.) standards. Stage IIIA refers to European standards. The engine features low fuel consumption, low noise level and has long service intervals for efficient and environmentally friendly operation.
Manufacturer and type CAT C11 ACERT
Type of cooling system water-cooled
Power output (SAE) [kW/rpm] 287/2100
Number of cylinders 6
Displacement/stroke [cm3] 11094
Max. torque and Rotation speed [Nm/rpm] 1187/2100
Specific fuel consumption [g/kWh] 235
Low idle speed [rpm] 800
Hydraulic pumps.
The hydraulic gear pumps are powered through an engine-integrated gearbox. Gear pumps are simple in construction and easy to maintain with low filtration requirements.
A double axial pump for tramming motors, rotation motor, feed motor, dust collector:
Manufacturer and type REXROTH:
Displacement [l/min] 126,126
Max. Pressure [bar] 320,320
A double gear pump for hydraulic oil cooler, compressor oil cooler, water cooler, SLU 22 oiler:
Manufacturer and type SAUER - DANFOSS
Displacement [l/min] 50,50
Max. Pressure [bar] 250,250
A gear pump for hydr. cylinders, magazine functions and pilot lines:
Manufacturer and type SAUER - DANFOSS
Displacement [l/min] 32
Max. pressure [bar] 200
Operating pressure settings in the hydraulic system are:
Tramming motors [bar] 320
Rotation motor [bar] 180
Feed motor [bar] 200
Dust collector fan motor [bar] 165
Hydraulic oil cooler [bar] 180
Compressor oil cooler [bar] 180
Water cooler [bar] 210
Hydraulic control system [bar] 35
Cylinders [bar] 250
Pipe changer [bar] 180
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| Length x width x height | 11993.0 × 2480.0 × 3275.0 |
| Weight | 50284.26 lb |
| worked hours | 7062 hours |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 31/01/2026 |
The Sandvik DI500 is a crawler-mounted drilling rig designed for demanding drilling operations. Manufactured in 2007, this robust machine measures 11,993 mm in length, 2,480 mm in width, and 3,275 mm in height, with a total weight of 22,815 kg. It features a tracked undercarriage, providing excellent mobility on rough and uneven terrain, as observed in outdoor working environments with rocky and dirt ground conditions.
The drilling rig is equipped with a tall drill mast that extends vertically and is supported by hydraulic cylinders, allowing precise control during drilling operations. Hydraulic drill components are integrated into the mast to facilitate efficient drilling performance. Access to the operator's cabin is provided via a metal ladder, and the cabin includes glass windows for visibility and protection.
The DI500's tramming system is powered by hydraulic axial piston motors with 3-stage planetary gears and integrated safety brakes, delivering a tractive force of 140 kN. It offers two tramming speeds: 0 to 2.4 km/h in first gear with a gradeability of 36.5° (74%), and 0 to 4 km/h in second gear with a gradeability of 17° (32%). The ground contact length of the tracks is 2,740 mm with a track gauge of 2,050 mm and track plate width of 350 mm, providing stable operation with a ground pressure of 104.9 kN/m² and ground clearance of 350 mm.
The powerpack includes a water-cooled, turbocharged CAT C11 ACERT diesel engine delivering 287 kW at 2,100 rpm, meeting Tier 3 and Stage IIIA emission standards. This 6-cylinder engine features low fuel consumption and noise levels. Hydraulic systems consist of multiple pumps from Rexroth and Sauer-Danfoss, operating at pressures up to 320 bar for tramming motors and 250 bar for cylinders, ensuring reliable and efficient hydraulic performance.
Overall, the Sandvik DI500 crawler drill rig is a well-equipped and powerful machine suitable for challenging drilling tasks, with visible components and structural features supporting its rugged functionality.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | May 6, 2026 |
Оборудване за сондиране Sandvik DI500
Vrtné zařízení Sandvik DI500
Sandvik DI500 Boreudstyr
Sandvik DI500 Bohrausrüstung
Εξοπλισμός γεώτρησης Sandvik DI500
Drilling Rig Sandvik DI500
Equipos de perforación Sandvik DI500
Matériel de forage Sandvik DI500
Oprema za bušenje Sandvik DI500
Sandvik DI500 Fúróberendezések
Attrezzature per la perforazione Sandvik DI500
Gręžimo įranga Sandvik DI500
Sandvik DI500 Boorapparatuur
Sprzęt wiertniczy Sandvik DI500
Equipamento de perfuração Sandvik DI500
Echipament de foraj Sandvik DI500
Sandvik DI500 Буровое оборудование
Oprema za bušenje Sandvik DI500
Sandvik DI500 Utrustning för borrning
Sondaj Ekipmanları Sandvik DI500
English (EU)
English (GB)