Price on request
Make an offer| ------------------- | |
| worked hours | 0 hours |
| hours under power | 0 hours |
| state | as-is, where-is |
| At local norms | yes |
| status | |
| Last availability date | 06/05/2026 |
The AAT X Series Stencil Cleaner is a state-of-the-art cleaning machine designed for stencil, misprint, and PCB defluxing applications. Manufactured in 2025, this machine is CE certified for use in the European market and built in the United States. It features a robust design with a white and blue color scheme complemented by stainless steel framing, providing durability and a professional appearance.
The system utilizes counter-rotating blind hole high energy spray bars that deliver added pressure to effectively clean fine pitch stencils, low stand-off components, misprinted through-hole and blind assemblies, as well as remove uncured glues and adhesives. Despite its powerful cleaning capabilities, it remains gentle enough for use on frameless and foil stencils.
The X Series includes independent wash and rinse holding tanks, which reduce water consumption. A final DI water rinse option displaces spent rinse water during operation, enhancing both tank and component cleanliness. The process chamber is spacious, with dimensions suited for various stencil sizes.
The machine is equipped with a control panel featuring a digital display and an emergency stop button for operational safety. Additionally, a warning light mounted on a pole provides visual alerts during operation. The enclosure includes a large transparent window on the upper section, allowing operators to monitor the cleaning process.
Standard features include automatic wash, rinse, and dry cycles, heated chemistry wash, programmable chemistry isolation, fixed rinse and air dry, a built-in drain pump, and an automated chemical metering pump. Optional enhancements such as closed loop rinse, misprint PCB water knife final rinse, hot vortex air dry, and a spring board holder are available.
Environmental benefits are integral to the design, offering closed loop wash, filtration of wash and rinse waste streams, and low energy and chemical consumption. Typical cleaning times are approximately 10 minutes for stencils, 20 minutes for misprints, and 25 minutes for PCB defluxing.
This machine operates on 220V, 60Hz, 20AMPs, 3 Phase power supply. The X30ATM model weighs 500 lb (227 kg), while the X40ATM model weighs 700 lb (318 kg). Dimensions and other specifications conform to NFPA 70, NFPA 79, IES, NEMA 1, NFPA 13, and OSHA standards.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
New Stencil cleaning machine from AAT.
CE certified for European market use, manufactured in the US.
All machines come with 12 months warranty
X30TM & X40TM Series Stencil / Misprint / PCB Cleaner CHEMISTRY TYPE: X30TM and X40TM models are available for flammable and combustible solvents/chemistries as well as aqueous based chemistries. SYSTEM CAPABILITIES: Stencil / Misprint / PCB Defluxing All In One System The X-Series system is designed around counter-rotating blind hole high energy spray bars. The added pressure allows the system to successfully clean fine pitch stencils, low stand-off components, misprinted throughhole, blind assemblies, and the ability to remove uncured glues and adhesives, yet gentle enough to use on frameless and foil stencils. Independent Wash and Rinse Holding Tanks The system features two independent holding tanks, which allow for lower water use. Final DI water rinse (if selected) displaces spent rinse water in the rinse tank throughout the rinse operation. This provides for higher tank cleanliness, and component cleanliness. Large Process Chamber Dimensions X-30TM Series Process Reservoir: 30” x 30” x 3” (76.2 cm x 76.2 cm x 7.62 cm) X-40TM Series Process Reservoir: 40” x 40” x 3” (101.6 cm x 101.6 cm x 7.62 cm) Conforms with NFPA 70, NFPA 79, IES, NEMA 1, NFPA 13, OSHA Tool Specifications: X30ATM Footprint: 48.5” W X 44” D X (59” to 90”) H (123.19 cm x 111.76 cm x (149.86 cm to 228.6 cm) X40ATM Footprint: 58.5” W X 44” D X (59” to 90”) H (148.59 cm x 111.76 cm x (149.86 cm to 228.6 cm) Electrical: 220V, 60Hz, 20AMPs, 3 Phase X30ATM Weight: 500 lb (227 kg) X40ATM Weight: 700 lb (318 kg)
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 172 |
| Last activity | May 6, 2026 |
New Stencil cleaning machine from AAT.
CE certified for European market use, manufactured in the US.
All machines come with 12 months warranty
X30TM & X40TM Series Stencil / Misprint / PCB Cleaner CHEMISTRY TYPE: X30TM and X40TM models are available for flammable and combustible solvents/chemistries as well as aqueous based chemistries. SYSTEM CAPABILITIES: Stencil / Misprint / PCB Defluxing All In One System The X-Series system is designed around counter-rotating blind hole high energy spray bars. The added pressure allows the system to successfully clean fine pitch stencils, low stand-off components, misprinted throughhole, blind assemblies, and the ability to remove uncured glues and adhesives, yet gentle enough to use on frameless and foil stencils. Independent Wash and Rinse Holding Tanks The system features two independent holding tanks, which allow for lower water use. Final DI water rinse (if selected) displaces spent rinse water in the rinse tank throughout the rinse operation. This provides for higher tank cleanliness, and component cleanliness. Large Process Chamber Dimensions X-30TM Series Process Reservoir: 30” x 30” x 3” (76.2 cm x 76.2 cm x 7.62 cm) X-40TM Series Process Reservoir: 40” x 40” x 3” (101.6 cm x 101.6 cm x 7.62 cm) Conforms with NFPA 70, NFPA 79, IES, NEMA 1, NFPA 13, OSHA Tool Specifications: X30ATM Footprint: 48.5” W X 44” D X (59” to 90”) H (123.19 cm x 111.76 cm x (149.86 cm to 228.6 cm) X40ATM Footprint: 58.5” W X 44” D X (59” to 90”) H (148.59 cm x 111.76 cm x (149.86 cm to 228.6 cm) Electrical: 220V, 60Hz, 20AMPs, 3 Phase X30ATM Weight: 500 lb (227 kg) X40ATM Weight: 700 lb (318 kg)
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| worked hours | 0 hours |
| hours under power | 0 hours |
| state | as-is, where-is |
| At local norms | yes |
| status | |
| Last availability date | 06/05/2026 |
The AAT X Series Stencil Cleaner is a state-of-the-art cleaning machine designed for stencil, misprint, and PCB defluxing applications. Manufactured in 2025, this machine is CE certified for use in the European market and built in the United States. It features a robust design with a white and blue color scheme complemented by stainless steel framing, providing durability and a professional appearance.
The system utilizes counter-rotating blind hole high energy spray bars that deliver added pressure to effectively clean fine pitch stencils, low stand-off components, misprinted through-hole and blind assemblies, as well as remove uncured glues and adhesives. Despite its powerful cleaning capabilities, it remains gentle enough for use on frameless and foil stencils.
The X Series includes independent wash and rinse holding tanks, which reduce water consumption. A final DI water rinse option displaces spent rinse water during operation, enhancing both tank and component cleanliness. The process chamber is spacious, with dimensions suited for various stencil sizes.
The machine is equipped with a control panel featuring a digital display and an emergency stop button for operational safety. Additionally, a warning light mounted on a pole provides visual alerts during operation. The enclosure includes a large transparent window on the upper section, allowing operators to monitor the cleaning process.
Standard features include automatic wash, rinse, and dry cycles, heated chemistry wash, programmable chemistry isolation, fixed rinse and air dry, a built-in drain pump, and an automated chemical metering pump. Optional enhancements such as closed loop rinse, misprint PCB water knife final rinse, hot vortex air dry, and a spring board holder are available.
Environmental benefits are integral to the design, offering closed loop wash, filtration of wash and rinse waste streams, and low energy and chemical consumption. Typical cleaning times are approximately 10 minutes for stencils, 20 minutes for misprints, and 25 minutes for PCB defluxing.
This machine operates on 220V, 60Hz, 20AMPs, 3 Phase power supply. The X30ATM model weighs 500 lb (227 kg), while the X40ATM model weighs 700 lb (318 kg). Dimensions and other specifications conform to NFPA 70, NFPA 79, IES, NEMA 1, NFPA 13, and OSHA standards.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 172 |
| Last activity | May 6, 2026 |
Машина за почистване на печатни платки AAT X Series Stencil Cleaner
Stroj na čištění PCB AAT X Series Stencil Cleaner
AAT X Series Stencil Cleaner PCB rensemaskine
AAT X Series Stencil Cleaner PCB Reinigungsanlage
Μηχάνημα καθαρισμού PCB AAT X Series Stencil Cleaner
AAT X Series Stencil Cleaner PCB cleaning machine
Máquina de limpieza de PCB AAT X Series Stencil Cleaner
Machine de nettoyage de PCB AAT X Series Stencil Cleaner
Stroj za čišćenje PCB-a AAT X Series Stencil Cleaner
AAT X Series Stencil Cleaner PCB tisztítógép
Macchina pulizia PCB AAT X Series Stencil Cleaner
PCB valymo mašina AAT X Series Stencil Cleaner
AAT X Series Stencil Cleaner PCB-reinigingsmachine
Myjka PCB AAT X Series Stencil Cleaner
Máquina de limpeza de PCB AAT X Series Stencil Cleaner
Mașină de curățat PCB AAT X Series Stencil Cleaner
AAT X Series Stencil Cleaner Уборочный станок для печатных плат
Mašina za čišćenje PCB-a AAT X Series Stencil Cleaner
AAT X Series Stencil Cleaner PCB rengöringsmaskin
PCB temizleme makinası AAT X Series Stencil Cleaner
English (EU)
English (GB)