Price on request
View priceContact us to receive an offer.
| Type | Automatic |
| PCB length | 24.01575 in |
| PCB width | 15.74803 in |
| ------------------- | |
| Length x width x height | 1650.0 × 1680.0 × 1530.0 |
| Weight | 3967.2 lb |
| worked hours | |
| hours under power | |
| state | in working conditions |
| At local norms | --------- |
| status | in production |
| Datasheet | Samsung SM 320 |
| Last availability date | 30/04/2026 |
The Samsung SM320 is a pick-and-place machine designed for efficient and precise component placement on printed circuit boards (PCBs). Manufactured in 2007, this machine features a compact footprint with dimensions of 1650 mm in length, 1680 mm in width, and 1530 mm in height, and it weighs approximately 1800 kg.
This model utilizes a flying vision and stage vision system for component identification, enabling high-speed positioning with capabilities such as 18,500 chips per hour for CHIP 1608 and 15,000 chips per hour for SOP, based on IPC9850 standards. It supports various component mounting ranges, including 1005 to 22 mm ICs and optional ranges for smaller ICs such as 0603 to 12 mm and 0402 to 7 mm. The component height capacity is up to 15 mm with the flying camera standard. PCB sizes accommodated range from small boards of 50 mm by 40 mm to larger options of 460 mm by 400 mm, with additional optional sizes up to 640 mm by 510 mm. The machine supports PCB thicknesses from 0.38 mm to 4.2 mm.
Equipped with up to 120 feeders (112 on docking carts), the SM320 operates on an AC power supply of 220/240 V at 50/60 Hz with three phases, and optional voltages of 340/380/415 V are available. The required air pressure is 5 kg/cm² with an air consumption of 260 NI/min.
From the images, the machine appears to be in good physical condition with no visible damage to the outer casing. It includes a control panel and a Dell monitor attached on the right side, displaying the Samsung Techwin SM320 software interface with tabs for PCB Edit, Product, Utility, Diagnosis, and System Setup. The emergency stop button is located on the front right panel, and an air pressure regulator gauge is visible on the lower left part of the machine, indicating attention to operational safety and control.
This Samsung SM320 pick-and-place machine is suitable for high-precision PCB assembly tasks requiring versatile component handling and reliable vision systems.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Component
Identification FLYING VISION +STAGE VISION
Efficiency Flight Camera Identification System
Positioning speed CHIP 1608 18500 CPH (IPC9850)
SOP 15000 CPH (IPC9850)
QFP 5500 CPH (IPC9850)
Fixed camera
vision system 1.4 SEC/QFP208(TRAY SUPPLY STANDARD)
Component
mounting range 1005～□22mmIC（Option
0603～□12mmIC/0402～□7mmIC）
Component height H12mm(Flying camera standard)
H15mm(Flying camera standard)
PCB size *Small size 50(L)*40(W)
*Large size 460(L)*400(W)/Option
510*460,640*510
PCB thickness 0.38mm-4.2mm
Number of feeders
installed 120ea/112ea(docking cart)
Power supply AC220/220/240V(50/60HZ,3 PHASE)
(Option 340/380/415V)
Air pressure 5kg/㎡,260 NI/MIN
Machine Weight 1800KG
Machine Size 1650L*1680D*1530H
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
Can this Samsung SM320 be powered on for a demo?
This Samsung SM320 pick-and-place machine can be powered on for a demonstration.
What type of storage does this Samsung SM320 use?
This equipment has had its HDD replaced by an SSD for faster booting with the original Samsung SM320 software.
Is a license dongle included with this Samsung SM320?
This Samsung SM320 pick-and-place machine includes a license dongle.
Was the Easy OLP software dongle included with this machine?
This machine was not initially included with the Easy OLP software dongle, which worked in the past until a newer machine was acquired.
Does this machine require a dongle to operate?
This machine operates without requiring a dongle for functionality.
Can new tasks be created with this equipment?
This equipment allows for the creation of new tasks.
Is USB task upload supported by this machine?
This machine supports task uploads via USB.
How many feeders are included with this machine?
This machine includes 50 pieces of 8 mm feeders, 80 pieces of 8 mm feeders, 25 pieces of 12 mm feeders, and 15 pieces of 16 mm feeders.
Does this equipment come with original Samsung feeders?
This equipment features original Samsung feeders.
Are pneumatic feeders included with this machine?
This machine is equipped with pneumatic feeders.
Have the 8 mm feeders been tested for reliability?
The 8 mm feeders have been tested without interruption as they are used in production daily.
Is the X-Y axis functioning without alarms on this machine?
This machine has X-Y axes and head unit operating without alarms.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 3 |
| Last activity | April 30, 2026 |
Component
Identification FLYING VISION +STAGE VISION
Efficiency Flight Camera Identification System
Positioning speed CHIP 1608 18500 CPH (IPC9850)
SOP 15000 CPH (IPC9850)
QFP 5500 CPH (IPC9850)
Fixed camera
vision system 1.4 SEC/QFP208(TRAY SUPPLY STANDARD)
Component
mounting range 1005～□22mmIC（Option
0603～□12mmIC/0402～□7mmIC）
Component height H12mm(Flying camera standard)
H15mm(Flying camera standard)
PCB size *Small size 50(L)*40(W)
*Large size 460(L)*400(W)/Option
510*460,640*510
PCB thickness 0.38mm-4.2mm
Number of feeders
installed 120ea/112ea(docking cart)
Power supply AC220/220/240V(50/60HZ,3 PHASE)
(Option 340/380/415V)
Air pressure 5kg/㎡,260 NI/MIN
Machine Weight 1800KG
Machine Size 1650L*1680D*1530H
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
Can this Samsung SM320 be powered on for a demo?
This Samsung SM320 pick-and-place machine can be powered on for a demonstration.
What type of storage does this Samsung SM320 use?
This equipment has had its HDD replaced by an SSD for faster booting with the original Samsung SM320 software.
Is a license dongle included with this Samsung SM320?
This Samsung SM320 pick-and-place machine includes a license dongle.
Was the Easy OLP software dongle included with this machine?
This machine was not initially included with the Easy OLP software dongle, which worked in the past until a newer machine was acquired.
Does this machine require a dongle to operate?
This machine operates without requiring a dongle for functionality.
Can new tasks be created with this equipment?
This equipment allows for the creation of new tasks.
Is USB task upload supported by this machine?
This machine supports task uploads via USB.
How many feeders are included with this machine?
This machine includes 50 pieces of 8 mm feeders, 80 pieces of 8 mm feeders, 25 pieces of 12 mm feeders, and 15 pieces of 16 mm feeders.
Does this equipment come with original Samsung feeders?
This equipment features original Samsung feeders.
Are pneumatic feeders included with this machine?
This machine is equipped with pneumatic feeders.
Have the 8 mm feeders been tested for reliability?
The 8 mm feeders have been tested without interruption as they are used in production daily.
Is the X-Y axis functioning without alarms on this machine?
This machine has X-Y axes and head unit operating without alarms.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Type | Automatic |
| PCB length | 24.01575 in |
| PCB width | 15.74803 in |
| ------------------- | |
| Length x width x height | 1650.0 × 1680.0 × 1530.0 |
| Weight | 3967.2 lb |
| worked hours | |
| hours under power | |
| state | in working conditions |
| At local norms | --------- |
| status | in production |
| Datasheet | Samsung SM 320 |
| Last availability date | 30/04/2026 |
The Samsung SM320 is a pick-and-place machine designed for efficient and precise component placement on printed circuit boards (PCBs). Manufactured in 2007, this machine features a compact footprint with dimensions of 1650 mm in length, 1680 mm in width, and 1530 mm in height, and it weighs approximately 1800 kg.
This model utilizes a flying vision and stage vision system for component identification, enabling high-speed positioning with capabilities such as 18,500 chips per hour for CHIP 1608 and 15,000 chips per hour for SOP, based on IPC9850 standards. It supports various component mounting ranges, including 1005 to 22 mm ICs and optional ranges for smaller ICs such as 0603 to 12 mm and 0402 to 7 mm. The component height capacity is up to 15 mm with the flying camera standard. PCB sizes accommodated range from small boards of 50 mm by 40 mm to larger options of 460 mm by 400 mm, with additional optional sizes up to 640 mm by 510 mm. The machine supports PCB thicknesses from 0.38 mm to 4.2 mm.
Equipped with up to 120 feeders (112 on docking carts), the SM320 operates on an AC power supply of 220/240 V at 50/60 Hz with three phases, and optional voltages of 340/380/415 V are available. The required air pressure is 5 kg/cm² with an air consumption of 260 NI/min.
From the images, the machine appears to be in good physical condition with no visible damage to the outer casing. It includes a control panel and a Dell monitor attached on the right side, displaying the Samsung Techwin SM320 software interface with tabs for PCB Edit, Product, Utility, Diagnosis, and System Setup. The emergency stop button is located on the front right panel, and an air pressure regulator gauge is visible on the lower left part of the machine, indicating attention to operational safety and control.
This Samsung SM320 pick-and-place machine is suitable for high-precision PCB assembly tasks requiring versatile component handling and reliable vision systems.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 3 |
| Last activity | April 30, 2026 |
Машина за автоматично поставяне Samsung SM 320
Odsazovací stroj Samsung SM 320
Samsung SM 320 Placeringsmaskine
Samsung SM 320 Bestückungsautomat
Μηχάνημα αυτόματης τοποθέτησης εξαρτημάτων Samsung SM 320
Samsung SM 320 Pick-and-place machine
Máquina de colocación Samsung SM 320
Machine de placement Samsung SM 320
Stroj za automatsko postavljanje Samsung SM 320
Samsung SM 320 Pick-and-place gép
Macchina pick and place Samsung SM 320
Automatinė montavimo mašina Samsung SM 320
Samsung SM 320 Pick-and-place machine
Maszyna do montażu powierzchniowego Samsung SM 320
Máquina de colocação Samsung SM 320
Mașină de plasare Samsung SM 320
Samsung SM 320 Установщик компонентов
Mašina za automatsko postavljanje Samsung SM 320
Samsung SM 320 Monteringsmaskin
Bileşen yerleştirme makinesi Samsung SM 320
English (EU)
English (GB)