Price on request
View price| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 01/05/2026 |
This listing is for an Ersa ECOSELECT 2 selective soldering machine, manufactured in 2013. The machine supports selective soldering processes including drop, point, or line flow spraying. It is designed to handle printed circuit boards (PCBs) up to 508 x 406 mm in size and up to 8 kg in weight. The soldering system includes a 12 kg tin tank, magnetic nozzles, an electromagnetic pump, and a nitrogen (N2) flow sensor to ensure precise control during operation. Additional features include automatic conveyor adjustment, automatic tin feed, and infrared heating to optimize soldering quality.
The machine is equipped with a conveyor system for PCB transport and has safety signage indicating the need for protective equipment during use. A flexible ventilation or exhaust hose is attached, likely for fume extraction.
Also available is a nitrogen generator package designed to provide high-purity nitrogen (99.999%). This package includes:
- An A5LX absorption dryer with a flow rate of 30 m³/h, maximum pressure of 16 bar gauge, and dew point of -40ºC at pressure. It includes compressed air filters rated at 0.01 micron and 1 micron downstream.
- An N2-20P nitrogen generator using PSA technology, delivering 2.7 m³/h of nitrogen at 4.2 bar pressure with 99.999% purity. It features a 1 micron compressed air filter, four isolation valves for compressed air and nitrogen lines, and an oxygen analyzer with local and remote monitoring capabilities via 4-20mA signal and Modbus communication.
- A PN 11 nitrogen buffer tank with 270 liters capacity and a bell pressure of 11 bar, equipped with a drain valve, pressure gauge, and safety valve.
- A PN22 humid air/nitrogen tank with 1000 liters capacity and a bell pressure of 11.5 bar, also equipped with a drain valve, pressure gauge, and safety valve.
The equipment includes CompAir branded industrial components with gauges and control panels, as well as connected pipes and hoses for gas supply.
The machine has recorded approximately 8,870 hours of operation. Original manual, software, and installation/training resources are available. The condition is used, and the machine is operational. This setup is suitable for precision selective soldering applications requiring controlled nitrogen atmospheres.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Ersa Selective Welding Ecoselct 2 model with drop, point or line flow spraying, supports panels up to 508x406mm and up to 8kg in weight, 12kg tank, magnetic nozzles, electromagnetic pump and N2 flow sensor. It also has automatic conveyor adjustment, automatic tin feed and infrared heating. Also available for sale in a nitrogen generator package for 99.999% purity.
Year: 2013
Condition: Used
Working: Yes
Original manual available: Yes
Original software available: Yes
Installation / Training resources: Yes
About nitrogen generator:
1x A5LX (Absorption dryer)
- regeneration by distended dry air;
- flow: 30 m3/h;
- max pressure: 16 barg;
- dew point: -40ºC to pressure
- compressed air filter: 0.01 micron
- downstream compressed air filter: 1 micron
1x N2-20P Nitrogen Generator (PSA Tecnology)
N2 flow Production: 2,7 m3/h
Purity of N2: 999,999%
Exit pressure of N2: 4,2 bar
Compressed aire filter: 1 micron
4 isolation valves for compressed air and nitrogen lines
Oxygen analyser with local and remote motorisation via 4-20mA signal
Remote control and mod Bus communication
1x PN 11 Nitrogen Buffer (Capacidad 270 liters)
bell pressure: 11 bar
Accessories: drain valve, pressure gauge and safety valve
1x PN22 Humid air tank /Nitrogeno (Capacidad 1000 liters)
bell pressure: 11.5 bar
Accessories: drain valve, pressure gauge and safety valve
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What year was this Ersa ECOSELECT 2 manufactured?
This Ersa ECOSELECT 2 selective soldering machine was manufactured in 2013.
What is the condition of the equipment?
This equipment is in good working condition with very low operating hours.
Is this Ersa ECOSELECT 2 currently operational?
This Ersa ECOSELECT 2 is currently under power.
Does this selective soldering machine have a side positioning unit?
This selective soldering machine includes a side positioning unit to hold PCBs.
What heating features does this Ersa ECOSELECT 2 have?
This Ersa ECOSELECT 2 features infrared preheating on the bottom and convection heating on the top.
Does this equipment have an automatic solder wire feeder?
This equipment is equipped with an automatic solder wire feeder for the first module.
Is a high-resolution camera included with this Ersa ECOSELECT 2?
This Ersa ECOSELECT 2 includes a high-resolution camera.
Does this selective soldering machine support automated PCB handling?
This selective soldering machine has automated PCB handling in line interface.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 10 |
| Last activity | April 20, 2026 |
Ersa Selective Welding Ecoselct 2 model with drop, point or line flow spraying, supports panels up to 508x406mm and up to 8kg in weight, 12kg tank, magnetic nozzles, electromagnetic pump and N2 flow sensor. It also has automatic conveyor adjustment, automatic tin feed and infrared heating. Also available for sale in a nitrogen generator package for 99.999% purity.
Year: 2013
Condition: Used
Working: Yes
Original manual available: Yes
Original software available: Yes
Installation / Training resources: Yes
About nitrogen generator:
1x A5LX (Absorption dryer)
- regeneration by distended dry air;
- flow: 30 m3/h;
- max pressure: 16 barg;
- dew point: -40ºC to pressure
- compressed air filter: 0.01 micron
- downstream compressed air filter: 1 micron
1x N2-20P Nitrogen Generator (PSA Tecnology)
N2 flow Production: 2,7 m3/h
Purity of N2: 999,999%
Exit pressure of N2: 4,2 bar
Compressed aire filter: 1 micron
4 isolation valves for compressed air and nitrogen lines
Oxygen analyser with local and remote motorisation via 4-20mA signal
Remote control and mod Bus communication
1x PN 11 Nitrogen Buffer (Capacidad 270 liters)
bell pressure: 11 bar
Accessories: drain valve, pressure gauge and safety valve
1x PN22 Humid air tank /Nitrogeno (Capacidad 1000 liters)
bell pressure: 11.5 bar
Accessories: drain valve, pressure gauge and safety valve
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What year was this Ersa ECOSELECT 2 manufactured?
This Ersa ECOSELECT 2 selective soldering machine was manufactured in 2013.
What is the condition of the equipment?
This equipment is in good working condition with very low operating hours.
Is this Ersa ECOSELECT 2 currently operational?
This Ersa ECOSELECT 2 is currently under power.
Does this selective soldering machine have a side positioning unit?
This selective soldering machine includes a side positioning unit to hold PCBs.
What heating features does this Ersa ECOSELECT 2 have?
This Ersa ECOSELECT 2 features infrared preheating on the bottom and convection heating on the top.
Does this equipment have an automatic solder wire feeder?
This equipment is equipped with an automatic solder wire feeder for the first module.
Is a high-resolution camera included with this Ersa ECOSELECT 2?
This Ersa ECOSELECT 2 includes a high-resolution camera.
Does this selective soldering machine support automated PCB handling?
This selective soldering machine has automated PCB handling in line interface.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 01/05/2026 |
This listing is for an Ersa ECOSELECT 2 selective soldering machine, manufactured in 2013. The machine supports selective soldering processes including drop, point, or line flow spraying. It is designed to handle printed circuit boards (PCBs) up to 508 x 406 mm in size and up to 8 kg in weight. The soldering system includes a 12 kg tin tank, magnetic nozzles, an electromagnetic pump, and a nitrogen (N2) flow sensor to ensure precise control during operation. Additional features include automatic conveyor adjustment, automatic tin feed, and infrared heating to optimize soldering quality.
The machine is equipped with a conveyor system for PCB transport and has safety signage indicating the need for protective equipment during use. A flexible ventilation or exhaust hose is attached, likely for fume extraction.
Also available is a nitrogen generator package designed to provide high-purity nitrogen (99.999%). This package includes:
- An A5LX absorption dryer with a flow rate of 30 m³/h, maximum pressure of 16 bar gauge, and dew point of -40ºC at pressure. It includes compressed air filters rated at 0.01 micron and 1 micron downstream.
- An N2-20P nitrogen generator using PSA technology, delivering 2.7 m³/h of nitrogen at 4.2 bar pressure with 99.999% purity. It features a 1 micron compressed air filter, four isolation valves for compressed air and nitrogen lines, and an oxygen analyzer with local and remote monitoring capabilities via 4-20mA signal and Modbus communication.
- A PN 11 nitrogen buffer tank with 270 liters capacity and a bell pressure of 11 bar, equipped with a drain valve, pressure gauge, and safety valve.
- A PN22 humid air/nitrogen tank with 1000 liters capacity and a bell pressure of 11.5 bar, also equipped with a drain valve, pressure gauge, and safety valve.
The equipment includes CompAir branded industrial components with gauges and control panels, as well as connected pipes and hoses for gas supply.
The machine has recorded approximately 8,870 hours of operation. Original manual, software, and installation/training resources are available. The condition is used, and the machine is operational. This setup is suitable for precision selective soldering applications requiring controlled nitrogen atmospheres.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 10 |
| Last activity | April 20, 2026 |
Машина за селективно запояване Ersa ECOSELECT 2
Selektívní pájecí stroj Ersa ECOSELECT 2
Ersa ECOSELECT 2 Selektiv loddemaskine
Ersa ECOSELECT 2 Selektivlötanlage
Μηχανή επιλεκτικής συγκόλλησης Ersa ECOSELECT 2
Ersa ECOSELECT 2 Selective soldering machine
Máquina de soldadura selectiva Ersa ECOSELECT 2
Machine de brasage sélectif Ersa ECOSELECT 2
Stroj za selektivno lemljenje Ersa ECOSELECT 2
Ersa ECOSELECT 2 Szelektív forrasztógép
Macchina di saldatura selettiva Ersa ECOSELECT 2
Selektyvus litavimo aparatas Ersa ECOSELECT 2
Ersa ECOSELECT 2 Selectieve soldeermachine
Maszyna do lutowania selektywnego Ersa ECOSELECT 2
Máquina de solda seletiva Ersa ECOSELECT 2
Aparat de lipit selectiv Ersa ECOSELECT 2
Ersa ECOSELECT 2 Станок для селективной пайки
Mašina za selektivno lemljenje Ersa ECOSELECT 2
Ersa ECOSELECT 2 Selektiv lödmaskin
Bölgesel lehimleme makinası Ersa ECOSELECT 2
English (EU)
English (GB)