5,740 $
Make an offer| Software | |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 27/03/2026 |
LeCroy WaveExpert 100H Sampling Oscilloscope System
The LeCroy WaveExpert 100H is a high-performance sampling oscilloscope designed for advanced signal integrity analysis and compliance testing of high-speed serial data links. Manufactured by LeCroy in 2011, this system supports the analysis of signals that cannot be physically probed, making it suitable for next-generation standards such as second generation PCI Express, Serial ATA, XAUI, and 10 Gigabit Ethernet.
This oscilloscope features a modular architecture that accommodates up to four optical or electrical channels with bandwidths reaching up to 100 GHz. It includes capabilities for clock recovery and serial pattern generation at data rates up to 13.5 Gb/s. The WaveExpert 100H is engineered to meet the increasing demands of serial data signal rates, which have grown from 2.5 Gb/s to 40 Gb/s and beyond, providing not only high bandwidth but also detailed analysis essential for qualifying high-speed links.
Key features include ultra-high bandwidth signal analysis, highly accurate jitter measurement, fast acquisition with deep memory, and a low jitter HCIS timebase for precise waveform analysis. The system also offers up to 20 GHz Time Domain Reflectometry (TDR) with full S-parameter measurements and Eye Doctor™ technology, which provides virtual probing and equalized signal analysis. Optical measurement capabilities at high data rates and modular acquisition options covering 20 to 100 GHz bandwidth further enhance its versatility. Additional modules include electrical and optical clock recovery as well as a PRBS pulse pattern generator.
The front panel is equipped with a display screen and multiple control knobs and buttons, including four vertical control knobs labeled 1 through 4 with voltage and millivolt settings, as well as horizontal and trigger control sections featuring knobs for delay, zero, level, and operational buttons such as auto, normal, single, stop, setup, and calibrate. The bottom panel contains multiple input/output connectors, including those labeled LeCroy ST-20 and WE-ON.
The rear panel provides various ports including PS/2, serial, USB, VGA, audio jacks, and power input with a fuse holder. The device shows warning labels regarding electric shock and grounding requirements. The unit features blue corner protectors on its case and a carrying handle on top, with ventilation holes visible on the side. Overall, the oscilloscope appears clean and well-maintained with no visible major damage or missing parts.
This system is suitable for professionals requiring detailed and accurate analysis of high-speed serial data signals in both electrical and optical domains.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Sampling oscilloscope system
LeCroy WaveExpert 100H Overview
WaveExpert 100H, the first sampling oscilloscope capable of acquiring, measuring and processing signals that
cannot be physically probed. It completely addresses the analysis and compliance requirements of the long serial
data patterns required by standards such as second generation PCI Express, serial ATA, XAUI and 10 Gigabit
Ethernet. The modular architecture of the Wave Expert supports up to four optical or electrical channels with
bandwidths up to 100 GHz as well as clock recovery and serial pattern generation up to 13.5 Gb/s.
In recent years, the rates of serial data signals have increased steadily from 2.5 Gb/s to 40 Gb/s and beyond. All this
speed, of course, pushes up the bandwidth requirements of oscilloscopes. However simply providing this bandwidth
is not sufficient for qualifying these high-speed links. High bandwidth oscilloscopes must have the detailed analysis
capability required by next-generation standards. Adding to the measurement complexity is the emergence of
receiver equalization which allows high-speed serial data links to operate error-free even when the signal is severely
distorted. The WaveExpert 100H is the ideal signal integrity analysis solution for these applications.
Ultra-High Bandwidth Signal Analysis
Highly Accurate Jitter Analysis
Fast acquisition, deep memory, and low jitter of HCIS timebase provide an unprecedented level of waveform analysis
Up to 20 GHz TDR with Full S-paramter Measurements
Eye Doctor™ Offers Virtual Probing and Equalized Signals
Optical measurements at high data rates
Modular acquisition covers bandwidth from 20 to 100 GHz
Electrical and optical clock recovery modules
PRBS pulse pattern generator module
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – small or medium company |
| Active since | 2023 |
| Offers online | 11 |
| Last activity | April 15, 2026 |
Sampling oscilloscope system
LeCroy WaveExpert 100H Overview
WaveExpert 100H, the first sampling oscilloscope capable of acquiring, measuring and processing signals that
cannot be physically probed. It completely addresses the analysis and compliance requirements of the long serial
data patterns required by standards such as second generation PCI Express, serial ATA, XAUI and 10 Gigabit
Ethernet. The modular architecture of the Wave Expert supports up to four optical or electrical channels with
bandwidths up to 100 GHz as well as clock recovery and serial pattern generation up to 13.5 Gb/s.
In recent years, the rates of serial data signals have increased steadily from 2.5 Gb/s to 40 Gb/s and beyond. All this
speed, of course, pushes up the bandwidth requirements of oscilloscopes. However simply providing this bandwidth
is not sufficient for qualifying these high-speed links. High bandwidth oscilloscopes must have the detailed analysis
capability required by next-generation standards. Adding to the measurement complexity is the emergence of
receiver equalization which allows high-speed serial data links to operate error-free even when the signal is severely
distorted. The WaveExpert 100H is the ideal signal integrity analysis solution for these applications.
Ultra-High Bandwidth Signal Analysis
Highly Accurate Jitter Analysis
Fast acquisition, deep memory, and low jitter of HCIS timebase provide an unprecedented level of waveform analysis
Up to 20 GHz TDR with Full S-paramter Measurements
Eye Doctor™ Offers Virtual Probing and Equalized Signals
Optical measurements at high data rates
Modular acquisition covers bandwidth from 20 to 100 GHz
Electrical and optical clock recovery modules
PRBS pulse pattern generator module
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Software | |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 27/03/2026 |
LeCroy WaveExpert 100H Sampling Oscilloscope System
The LeCroy WaveExpert 100H is a high-performance sampling oscilloscope designed for advanced signal integrity analysis and compliance testing of high-speed serial data links. Manufactured by LeCroy in 2011, this system supports the analysis of signals that cannot be physically probed, making it suitable for next-generation standards such as second generation PCI Express, Serial ATA, XAUI, and 10 Gigabit Ethernet.
This oscilloscope features a modular architecture that accommodates up to four optical or electrical channels with bandwidths reaching up to 100 GHz. It includes capabilities for clock recovery and serial pattern generation at data rates up to 13.5 Gb/s. The WaveExpert 100H is engineered to meet the increasing demands of serial data signal rates, which have grown from 2.5 Gb/s to 40 Gb/s and beyond, providing not only high bandwidth but also detailed analysis essential for qualifying high-speed links.
Key features include ultra-high bandwidth signal analysis, highly accurate jitter measurement, fast acquisition with deep memory, and a low jitter HCIS timebase for precise waveform analysis. The system also offers up to 20 GHz Time Domain Reflectometry (TDR) with full S-parameter measurements and Eye Doctor™ technology, which provides virtual probing and equalized signal analysis. Optical measurement capabilities at high data rates and modular acquisition options covering 20 to 100 GHz bandwidth further enhance its versatility. Additional modules include electrical and optical clock recovery as well as a PRBS pulse pattern generator.
The front panel is equipped with a display screen and multiple control knobs and buttons, including four vertical control knobs labeled 1 through 4 with voltage and millivolt settings, as well as horizontal and trigger control sections featuring knobs for delay, zero, level, and operational buttons such as auto, normal, single, stop, setup, and calibrate. The bottom panel contains multiple input/output connectors, including those labeled LeCroy ST-20 and WE-ON.
The rear panel provides various ports including PS/2, serial, USB, VGA, audio jacks, and power input with a fuse holder. The device shows warning labels regarding electric shock and grounding requirements. The unit features blue corner protectors on its case and a carrying handle on top, with ventilation holes visible on the side. Overall, the oscilloscope appears clean and well-maintained with no visible major damage or missing parts.
This system is suitable for professionals requiring detailed and accurate analysis of high-speed serial data signals in both electrical and optical domains.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2023 |
| Offers online | 11 |
| Last activity | April 15, 2026 |
LeCroy WaveExpert 100H
Vzorkovací osciloskopový systém LeCroy WaveExpert 100H
LeCroy WaveExpert 100H
LeCroy WaveExpert 100H Sampling-Oszilloskop-System
LeCroy WaveExpert 100H
LeCroy WaveExpert 100H Sampling oscilloscope system
Sistema de osciloscopio de muestreo LeCroy WaveExpert 100H
Système d'oscilloscope d'échantillonnage LeCroy WaveExpert 100H
LeCroy WaveExpert 100H
LeCroy WaveExpert 100H
Sistema di campionamento dell'oscilloscopio LeCroy WaveExpert 100H
LeCroy WaveExpert 100H
LeCroy WaveExpert 100H
Układ oscyloskopu próbkującego LeCroy WaveExpert 100H
LeCroy WaveExpert 100H
LeCroy WaveExpert 100H
LeCroy WaveExpert 100H Система выборочного осциллографа
LeCroy WaveExpert 100H
LeCroy WaveExpert 100H
Örnekleme osiloskop sistemi LeCroy WaveExpert 100H
English (EU)
English (GB)