5,782 $
Make an offer| Conveyor Width | in |
| Number of needles | |
| ------------------- | |
| Length x width x height | - × - × - |
| Weight | lb |
| worked hours | |
| hours under power | |
| state | in working conditions |
| At local norms | --------- |
| status | |
| Datasheet | Günther PI 17 |
| Last availability date | 05/05/2026 |
This listing is for a Günther PI 17 brine injection machine, manufactured in 2003. The machine is constructed primarily of stainless steel and features a curing injector equipped with 17 needles. It includes two transparent hoses connected at the top, secured with metal clamps, which are part of the internal piping system. The injection needle assembly consists of multiple needles and springs housed in a combination of stainless steel and white plastic components.
The machine is mounted on a wooden pallet for ease of transport. It has a control panel located on the front side, which includes start/stop buttons and a pressure gauge for monitoring operation. An electrical box with a high voltage warning is present, labeled for 400V ~ 50Hz power connection.
Internally, the machine houses a blue motor and mechanical linkage supported by a stainless steel frame. The internal components appear clean and well maintained, though some wear, discoloration, surface scratches, and minor dirt are visible on metal surfaces, indicating typical usage.
The overall dimensions are approximately 140 cm in length, 58 cm in width, and 180 cm in height, with a total weight of about 262 kg. Operating instructions are included with the machine. The condition is described as very good used, with the machine appearing clean and intact. This brine injection machine is suitable for curing processes requiring multiple needle injection points and is powered by a 400V electrical connection.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Injector Günther PI 17; curing injector with 17 needles,
with new hoses and clamps, operating instructions,
connection 400V, dimensions LxWxH approx. 140x58x180cm, weight approx. 262kg,
year of manufacture 2003, very good used condition, runs perfectly
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2021 |
| Offers online | 20 |
| Last activity | May 6, 2026 |
Mayer Lebensmitteltechnik is a leading innovator in the food processing industry, based in Germany. With a strong commitment to quality and efficiency, Mayer specializes in the design and manufacturing of advanced machinery tailored for food production. Their state-of-the-art equipment is engineered to meet the diverse needs of food manufacturers, ensuring optimal performance and reliability in every application. With decades of experience, Mayer Lebensmitteltechnik has established itself as a trusted partner for businesses looking to enhance their production capabilities. Their extensive product range includes cutting-edge solutions for processing, packaging, and handling food products, all designed to streamline operations and improve overall productivity. The company prides itself on its ability to customize solutions that cater to the specific requirements of each client, ensuring that they receive the best possible support and technology. Mayer’s dedication to innovation is evident in their continuous investment in research and development. By staying ahead of industry trends and technological advancements, they provide clients with the tools necessary to thrive in a competitive market. Their expert team is always ready to assist, offering comprehensive support from initial consultation through to installation and maintenance. In summary, Mayer Lebensmitteltechnik stands out as a premier choice for food processing solutions in Germany and beyond. Their focus on quality, customization, and customer satisfaction makes them an invaluable partner for any food production business aiming to elevate its operations.
Injector Günther PI 17; curing injector with 17 needles,
with new hoses and clamps, operating instructions,
connection 400V, dimensions LxWxH approx. 140x58x180cm, weight approx. 262kg,
year of manufacture 2003, very good used condition, runs perfectly
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Conveyor Width | in |
| Number of needles | |
| ------------------- | |
| Length x width x height | - × - × - |
| Weight | lb |
| worked hours | |
| hours under power | |
| state | in working conditions |
| At local norms | --------- |
| status | |
| Datasheet | Günther PI 17 |
| Last availability date | 05/05/2026 |
This listing is for a Günther PI 17 brine injection machine, manufactured in 2003. The machine is constructed primarily of stainless steel and features a curing injector equipped with 17 needles. It includes two transparent hoses connected at the top, secured with metal clamps, which are part of the internal piping system. The injection needle assembly consists of multiple needles and springs housed in a combination of stainless steel and white plastic components.
The machine is mounted on a wooden pallet for ease of transport. It has a control panel located on the front side, which includes start/stop buttons and a pressure gauge for monitoring operation. An electrical box with a high voltage warning is present, labeled for 400V ~ 50Hz power connection.
Internally, the machine houses a blue motor and mechanical linkage supported by a stainless steel frame. The internal components appear clean and well maintained, though some wear, discoloration, surface scratches, and minor dirt are visible on metal surfaces, indicating typical usage.
The overall dimensions are approximately 140 cm in length, 58 cm in width, and 180 cm in height, with a total weight of about 262 kg. Operating instructions are included with the machine. The condition is described as very good used, with the machine appearing clean and intact. This brine injection machine is suitable for curing processes requiring multiple needle injection points and is powered by a 400V electrical connection.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2021 |
| Offers online | 20 |
| Last activity | May 6, 2026 |
Mayer Lebensmitteltechnik is a leading innovator in the food processing industry, based in Germany. With a strong commitment to quality and efficiency, Mayer specializes in the design and manufacturing of advanced machinery tailored for food production. Their state-of-the-art equipment is engineered to meet the diverse needs of food manufacturers, ensuring optimal performance and reliability in every application. With decades of experience, Mayer Lebensmitteltechnik has established itself as a trusted partner for businesses looking to enhance their production capabilities. Their extensive product range includes cutting-edge solutions for processing, packaging, and handling food products, all designed to streamline operations and improve overall productivity. The company prides itself on its ability to customize solutions that cater to the specific requirements of each client, ensuring that they receive the best possible support and technology. Mayer’s dedication to innovation is evident in their continuous investment in research and development. By staying ahead of industry trends and technological advancements, they provide clients with the tools necessary to thrive in a competitive market. Their expert team is always ready to assist, offering comprehensive support from initial consultation through to installation and maintenance. In summary, Mayer Lebensmitteltechnik stands out as a premier choice for food processing solutions in Germany and beyond. Their focus on quality, customization, and customer satisfaction makes them an invaluable partner for any food production business aiming to elevate its operations.
Инжектор за пекел Günther PI 17
Nakládací injektor Günther PI 17
Saltinjektor Günther PI 17
Pökelinjektor Günther PI 17
Εγχυτήρας άλμης Günther PI 17
Curing Injector Günther PI 17
Inyector de salmuera Günther PI 17
Injecteur de saumure Günther PI 17
Injektor za soljenje Günther PI 17
Pácoló injektor Günther PI 17
Iniettore di salamoia Günther PI 17
Sūrimo injektorius Günther PI 17
Pekelinjector Günther PI 17
Wtryskiwacz peklujący Günther PI 17
Injetor de cura Günther PI 17
Injector de saramură Günther PI 17
Инжектор рассола Günther PI 17
Инјектор за слани раствор Günther PI 17
Saltinjektor Günther PI 17
Tuzlama Enjektörü Günther PI 17
English (EU)
English (GB)