Offer Title: COMELEC C-30-S Parylene Coater Manufacturer: Comelec Model: C-30-S Year of Manufacture: Not specified Technical Condition: Good Additional Information: Selling "AS IS, WHERE IS."
Offer Title: KOSES LASER SEALING TOOL KLFS-201M KOS-01 Manufacturer: Koses Model: KLFS-201M Technical Condition: Good Description: The KOSES Laser Sealing Tool KLFS-201M is designed for bonding glass substrates through laser irradiation on frit. This semi-automatic laser sealing machine is ideal for small production systems, allowing users to produce specific packages efficiently. Key Features: - Semi-Automatic System: Facilitates operator commitment to glass handling and sealing processes. - Alignment System: Ensures precise positioning for laser processing. - User-Friendly Interface: Designed for ease of use, enhancing operational efficiency. Specifications: - IN/OUT TYPE: UMAC I/O Controller - LOADING/UNLOADING TYPE: Vacuum Chuck (Manual) - POWER: AC 220V ± 10V, 60A, 3 Phase, 50/60Hz - AIR PRESSURE: Minimum 5 kgf/cm² - AIR COMPRESSOR: Required This machine is sold "AS IS, WHERE IS."
ULTRATECH SAVANNAH G2 Atomic Laser Deposition System Volts: 100-120 VAC KVA: 1.5KVA-2KVA HERTZ: 50-60 Hz The Savannah G2 platform incorporates a wide range of advanced field-upgradable options intended to aid serious researchers in expanding their portfolio of available ALD films, as well as allow them to characterize the films in real time. Among the Savannah G2's array of options, a unique low vapor precursor delivery system has been developed to enable the growth of novel materials including single- and multi-component films from Perovskite, Yttrium, Lithium, and the rare earth families. Additional options such as ellipsometry, Quartz Crystal Microbalance (QCM), and mass spectrometry allow for the simultaneous growth of ALD films and the real-time characterization of the deposition process, all of which are indispensable capabilities for process development and optimization activities.
MIR 250 & MIR 600, AMR/AGV robots for transport For sale is a MIR 250 unit with potential PCB conveyor option on top. 1 unit available. https://www.mobile-industrial-robots.com/solutions/robots/mir250/ For sale are 3 units of MIR 600, vintage 2021. Some are new. https://www.mobile-industrial-robots.com/solutions/robots/mir600/
Product Title: Waters HPLC Water Sampling System Brand: Waters Model: HPLC Condition: Used Technical Condition: Good State: Visible Includes: - Waters HPLC Water Sampling System with Waters 600 Controller - Waters 717 Plus Auto Sampler - Waters 2475 Multi-Fluorescent Detector - Waters 410 Refractometer Differential Controller - Waters 486 Tunable Absorbance Detector - Waters Temperature Controller with Column Heater Module Note: Selling "as is, where is." The equipment was de-installed in working, operational condition. Please be aware that we do not have the ability to test all equipment.
SVG Coat Develop Track Model #8836 HPO, 8838 VP, 8826PC, CTD MD DD 8836 Contact for pricing and inspection. Equipment is currently installed in FAB, and can be viewed upon request. EQUIPMENT TYPE: Coat Develop Track MANUFACTURER: SVG Model: #8836 HPO, 8838 VP, 8826PC, CTD MD DD 8836 Description: SVG 8826/8836 Series Photoresist Coater and Developer (8800 Series Photoresist Coater) SVG Dual Track Coater and Developer. Process: Send-Prime-Chill-Coat-Bake-Receive, Send-Bake-Chill-Develop-Bake-Receive. System will be refurbished to customer specifications. Currently, the system is set up for 6". The system can be set up with a variety of photoresist pumps. Includes: (1) SVG Coat Develop Track Model #8836 HPO, 8838 VP, 8826PC, CTD MD DD 8836 For sale: SVG Coat Develop Track Model #8836 HPO, 8838 VP, 8826PC, CTD MD DD 8836. Selling "as is, where is." We do not have the ability to test all equipment. This system was de-installed in working, operational condition.
Product Title: Brewer Science CEE 100CB Hotplate/Spinner Manufacturer: Brewer Science Model: CEE 100CB Condition: Used Technical Condition: Good State: Visible Description: The Brewer Science CEE 100CB Hotplate/Spinner is designed to support three bake methods: proximity, soft-contact, and hard-contact, providing maximum control over substrate warm-up, solvent drying, and resin curing characteristics. This system operates at a maximum bake temperature of 300 °C. It features a battery-backed memory that can store up to ten user programs, which include preset values for bake temperature, bake time, and bake method while in hotplate mode. Each bake program can consist of up to three consecutive bake methods. In spinner mode, the machine also allows for ten user programs, each with ten individual steps for setting spin speed, acceleration, and time, enabling very precise spinning capabilities. This unit is being sold "as is, where is." Please note that we do not have the ability to test all equipment. The system was de-installed in working, operational condition.
Capacity: 45 cu. ft./ 1274L Exterior Dimensions: 53.5"W x 32"D x 78"H Interior Dimensions: 48.75"W x 27"D x 61.75"H Temperature Range: 1C to 12C Weight: 560 lbs. Shelves: 7 full and 2 halves Doors: Dual Sliding Doors Refigerant: R134A
TAZMO SOG COATER CSX2132N Manufacturer: Tazmo Model: CSX2132N Technical Condition: Good State: Visible Description: This equipment is a through processing apparatus designed for SOG coating to baking, enabling fully automatic film formation on 150mm substrates from cassette to cassette. The system features substrate transfer performed by a two-hand robot, ensuring efficient operation. Included with the system are a standard cup, a cool plate, three bake plates, an aligner, a cooling area, a vacuum dry, and a high temperature low O2 density bake, making it a comprehensive solution for SOG coating processes.
Offer Title: PlasmaFinish V55-G Plasma System Manufacturer: Plasmafinish Model: V55-G Technical Condition: Good Vacuum Chamber Dimensions: 340 x 400 x 450 mm Door Feature: Auto unlock feature after end of process Microwave Excitation: 2.45 GHz magnetron Maximum Adjusted Power: 1200 W Gas Channels: 3 gas channels with Brooks MFC (N2, Ar, O2) Vacuum Pump: Pfeiffer DUO65C vacuum pump with Fomblin oil (PFPE) Pressure Gauge: Baratron absolute transducer PLC Process Controller: Equipped with RS232 Power Requirements: 230/400 VAC, 3 phase, grounded, 50/60 Hz
Model: 600 SemiAuto - Semi-Automatic RF Plasma System - Can process up to 200mm wafers - Used for photoresist stripping and surface cleaning, as well as etching silicon and its compounds - Chamber Size: 245mm diameter, 380mm depth - Chamber Material: ceramic - ENI RF Generator: 0-600 Watt, 13.56 MHz - Gases: 4 channels controlled by 4 MFCs - Leybold D65B Vacuum Pump - Dimensions: 740mm x 624mm x 701mm + connections - Electrical: 230V, 50/60Hz, 15A, 2kW - 1731 hours
Product Title: PlasmaFinish V55-G Microwave Ashing System Manufacturer: Plasmafinish Model: V55-G Technical Condition: Good Vacuum Chamber Dimensions: 340 x 400 x 450 mm Door Feature: Auto unlock feature after end of process Microwave Excitation: 2.45 GHz magnetron Maximum Adjusted Power: 1200 W Gas Channels: 3 gas channels with Brooks MFC (N2, Ar, O2) Power Requirements: 120/208 V Vacuum Pump: Pfeiffer DUO65C vacuum pump with Fomblin oil (PFPE) Pressure Gauge: Baratron absolute transducer Control System: PLC process controller with RS232 This PlasmaFinish V55-G Microwave Ashing System is designed for efficient and precise ashing processes, featuring advanced technology and reliable components.