New offers - Metal - Forging and forming machines 90

Type: LHL50H (2 Machines) Each Machine has a Hydraulic Pump, Gassing Cabinet, (2) Robots, Coating Equipment, Drying Oven (1) Common Traving Sand Mixer with Dosing System General machine data 1 . Shooting capacity 50 l 2 . Hydraulic pre-load (clamping force) exerted by table cylinder 80.000 daN 3 . Stroke carriage for core removal 1.700 mm 4 . Stroke carriage for core box change 1.950 mm 5 . Stroke shoot and gassing unit 1.450 mm 6 . Maximum horizontal partition of core box 330 mm 7 . Stroke of press cylinder 420 mm 8 . Distance between upper edge core box adapter to lower edge clamping unit shooting head 490 mm 9 . Max. stroke of vertical ejector 140 mm 10 . Volume of tank for shoot air 500 l 11 . Maximum volume of sand hopper (special volume on request) 310 l 12 . Total weight of machine with control system and hydraulic system, without enclosure 38.000 kg 13 . Weight of heaviest single component 18.000 kg

Title: PRESSIX T50 CNR4 Press Manufacturer: PRESSIX Model: T50 CNR4 Year of manufacture: 1999 Technical condition: Overhauled Status: Available for viewing Technical specifications: Rated force: 500 kN Weight: 3,500 kg Strokes per minute: 90 Max. insertions per minute: 41 Operating air pressure min./max.: 4–5.5 bar Stopping time: 0.117 s Safety distance: 187 mm Energy: 2000 kJ Adjustable stroke min./max.: 8–100 mm Hammer adjustment: 70 mm Highest adjustment point: 280 mm Maximum extraction stroke: 30 mm Work surface dimensions: 770x530x58 mm Ram surface dimensions: 450x300 mm Distance between work surface and ram: 275 mm Shank diameter: 45 mm Projection from center: 270 mm Max. die dimensions: 450x300 mm Upper die weight: 84 kg Voltage: 400 V Hydraulic overload New components installed: • Motor bearings • Flywheel bearings • Motor belts • Clutch plates • Front safety guards • Work surface re-machined on a CNC machine • Foot pedal assembly • Electrical panel • Hydraulic overload pump Comes with user manual and CE conformity certificate Six (6) month warranty, excluding electronic parts

HYDRAULIC PRESS Manufacturer: F.lli NAVA Srl Model: 2MS/SL 150 Year of manufacture: 1999 Technical condition: as shown, in its current state Status: available for viewing We are selling the press as shown in the photos. We are available to show you the press at our facility if you are seriously interested. Shipping costs are the responsibility of the buyer.

STANKO MB4136 Forging hammer Impact force 11kj Mallet weight 400 kg

Manufacturer: Dieffenbacher Valves mostly new: Parker Hannefin 20/200 bar Infrared curtain: all new Safety electrical system including warning light: all new Electronics: all new – Mitsuboshi, control room-compatible Pressure and temperature sensors: all new All 32 presses overhauled in 2023 / 2024 The presses were steam-heated, with steam and temperature control for 4 presses each, i.e. 8 controllers. Pressurised water was used as the pressure medium (environmentally friendly), with the new low-pressure pump (16 bar) supplied as an additional item. Should you require a layout plan, I can subsequently provide CAD drawings.