Hot deals - Best offers from Exapro - Electronics 37

7pieces, New, Original

Original power cord and manuals, Protective glasses, Footswitch, All original attachments included Soprano Platinum for Sale • Installed: March 2024 • Started use: July 2024, used for 2 months • Purchased from an official dealer in Athens • Selling due to salon closure Excellent condition, almost unused. Ready for immediate operation.

An electronic assembly and mounting line that meets the highest quality and productivity standards. The line enables surface-mounted (SMT) and through-hole (THT) mounting of electronic components with maximum efficiency and minimized production risks. The main advantages of the line: • High productivity: up to 60,000 components per hour with support for printed circuit boards from 50x50 mm to 460x400 mm. • Flexibility: the equipment ensures quick changeover to boards of varying complexity and the ability to install various elements in one run. • Automation: high automation of processes, including self-monitoring functions, which eliminates the possibility of operator errors. • Quality control: the line includes solutions for automatic optical control (AOI), X-ray inspection and cleaning of boards from flux residues. • Readiness for long-term operation: the line is practically new (equipment manufactured in 2023), minimal operating time. Main equipment of the line: 1. Automatic screen printing printer ESE US-2000X (Operating time 139 h): o High precision of solder paste application (±12.5 μm) and repeatability (±25 μm). o Programmable stencil cleaning system. o Support for boards up to 5 mm thick. 2. Two multifunctional SMD component installers Samsung SM 482 Plus (Operating time 250 h and 306 h): o Installation speed up …

DESEN In Line Printer Model DSP-1008 - D.K.R: Flawless solder paste precision. Mirae MX200L Pick-and-Place Machine: 21,000 CPH for rapid placement. C-100LD-2-L Conveyor: Seamless PCB flow. HTS-0802-N Reflow Oven: Six zones for perfect soldering. MU-390A-CT Multi-Magazine Unloader: High-throughput efficiency. Ersa ETS 250 Wave Soldering System: Reliable through-hole soldering. MEK ISO-Spector 330SL AOI System: 3D/2D inspection for top quality. SMEMA-compliant with full documentation

High-precision MicroCraft E4H6151 EMMA Series Flying Probe / Moving Probe Bare Board Tester available for immediate sale. This system is fully configured and production-ready, ideal for **high-mix, low-volume PCB testing, HDI boards, and fine-pitch applications. Model: MicroCraft E4H6151 (EMMA H-Series) Test Type: Flying Probe / Moving Probe Bare Board Tester Max Board Size: **610 x 510 mm (24" x 20") Configuration: 4 × Type 7 Probes + Type E CCD Camera System Application: Bare board electrical testing (opens/shorts), high-density PCB validation INCLUDED OPTIONS & SOFTWARE EMMA Controller (Windows 10 based system) TPG Software License (Test Point Generator) EVS Software License (Error Viewer System) High-Speed Video Capture Hardware Barcode Printer & Scan Wand Side Clamps (High-value accessory for board stability) Two sets of standard probes (blades/needles) CCD Vision Alignment System CONDITION Excellent operational condition Maintained in professional environment (medical device manufacturer) Fully functional, production-capable system Available for inspection and/or video demonstration

Type of Machine: CT930 Rated Voltage: 3x400V Rated Current: 62A Rated Power: 43 Kw Frequency: 50/60HZ Leakage Current: 12mA Weight: 2810KG N2 pressure: 0.6Mpa Air-pressure: 0.6Mpa Max.Loading: 62A N2-consumption: 40m3/Hr Air-consumption: m3/Hr Date: 04.Jan.2022 Document No: CD3303 Short circuitRating: 10KA

The Ultimaker 2+ Connect is a single-extrusion 3D printer designed for fast and efficient single-material printing applications. The Connect 3+ features network connectivity, touchscreen controls and interchangeable nozzles. It can be paired with the optional Ultimaker 2+ Connect Air Manager, designed to increase user safety, removing up to 95% of ultra-fine particles and protecting users from hot and moving components to give you more confidence and flexibility in set-up. The Utimaker 2+ Connect has a maximum build volume of 223 mm (w) x 220 mm (d) x 205 mm (h), a layer resolution of 600 to 20 microns (4 available 0.4 mm nozzles included) and print speeds of up to 24 mm3/s. The Ultimaker 2+ Connect is a professional 3D printer for demanding environments, ideal for product design applications or higher education. This printer is 1.5 years old, max 20 hours run, new price 39.000 SEK (3800 Euro). This printer is a great addition for those who need to quickly produce a prototype or fixtures for their business.

This chamber was purchased new in 2021 and has been used for approximately 10 working days in our R&D facility. It is in full working order and has passed a comprehensive internal performance test in April 2026 (test report available on request and on our dedicated product page). We are a Croatian electronics R&D and manufacturing company (ISO 9001, 15 international patents, IPC-A-610 certified). This is a single-owner, well-maintained instrument being sold because it is surplus to our current requirements — not a dealer resale. KEY SPECIFICATIONS - Temperature range: –45 °C to +150 °C - Humidity range: 20 % RH to 98 % RH - Workspace volume: 225 litres (700 × 700 × 480 mm) - Outer dimensions: approx. 1,000 × 900 × 1,750 mm (W × D × H) - Controller: KOMEG KM-5166 PID touchscreen, 269 programmable steps - Connectivity: RS-232, RS-485, Ethernet, USB - Refrigerant: R404A (dual-compressor cascade) - Power supply: AC 3~ 380 V / 50 Hz / N+PE - Heating rate: approx. 3 °C/min - Cooling rate: approx. 1 °C/min - Compliance reference: IEC 60068, MIL-STD-810D CONDITION - Year: 2021 (purchased new) - Hours of use: approx. 240 h (≈ 10 working days) - Functional …

✅ Specifications: - Model: Soprano ICE Platinum (Alma Lasers) - Year of construction: 2020 - Maintenance: Professionally serviced annually - last service performed recently - Condition: Technically excellent - Laser Head: Not included (head is completely removed) ⸻ 🎁 What is included: - Original foot pedal - Banner (promotional material) - Small laser head housing (for storage or replacement) - All standard accessories & cables

Weight: 240 kg Rated Voltage: 230 V Rated Power Factor: 1.0 Flood Lights: 4 x 320W Lamp Type: MultiLED Lifting System: Manual Maximum Height: 7 meters Frequency: 50 Hz Engine Speed: 1500 rpm Generator Set: IOS 8528 Condition: Very good – ready for use Quantity Available: Multiple units in stock

Kuka SEMD MEMD adjustment set 00 228 938 Used only a few times Has been sitting unused in the closet for years Hence the attractive price

Temporary Switchgear Container T7 Manufacturer: Telelettra Srl (Italy) Model: 12SGRU-T7 Year of Production: 2019 Weight: 4900 kg Protection Class: IP54 Operating Temperature: -30°C to +45°C Application: Medium- and Low-Voltage Distribution – Portable Substation Unit Technical Specifications: Dry-Type Transformer: Power: 1000 kVA Rated Voltage: 6000/400 V AC Frequency: 50 Hz Connection: Dyn11 MV Cabinet: Rated Voltage: 12 kV Rated Current: 630 A LV Cabinet: Rated Voltage: 400 V AC Rated Current: 1600 A Maximum Current: 115 A Temporary Switchgear Container T4 Manufacturer: Telelettra Srl (Italy) Model: 12SGRU-T4 Year of Production: 2019 Weight: 6150 kg Protection Rating: IP54 Ambient Temperature Range: -30°C to +45°C Technical Specifications: Transformer (Dry Type, MV/LV): Power Rating: 1600 kVA Rated Voltage: 6000/400 V Rated Frequency: 50 Hz Connection: Dyn11 Transformer Serial No.: 110692 MV Cabinet: Rated Voltage: 12 kV Rated Current: 630 A Serial Numbers: 190822, 190823, 190824 LV Cabinet: Rated Voltage: 400 V Rated Current: 2500 A Operational Voltage: 6 kV Maximum Current: 190 A Serial Number: J0919-02 T4 Stoc - 10 pices

The Artec Space Spider is a professional handheld 3D scanner with very high resolution, using blue structured light technology. It was originally developed for the International Space Station (ISS) and is valued for its accuracy and stability of operation in changing environmental conditions thanks to its advanced temperature stabilization system. 3D accuracy: up to 0.05 mm. 3D resolution: up to 0.1 mm. Texture resolution: 1.3 megapixels (Mpx). Scanning speed: up to 7.5 frames per second (equivalent to processing up to one million points per second). Technology: blue structured LED light, safe for people and objects. Tracking: Hybrid, based on geometry and color, no measurement markers required. Weight: 0.85 kg, which provides high mobility. Compatibility: Works with Artec Studio software for data processing and export to popular CAD formats (e.g. STL, OBJ, PLY). Portability: It can be powered by an optional battery pack, allowing you to work in the field without a constant power source.

Ultrasonic misting device ECA 2000 H Ultrasonic misting device ECA 2000 H Ultrasonic fogger ECA 800 H more at: https://simplyclean.cz/ecatech-eca-2000

Precalibrated non-contact 3D scanner. The scanner has the ability to scan small parts at a high level of accuracy. The HDI 109 is a turnkey solution that delivers a seamless 3D scanning experience from acquisition to post-processing of scans into a full digital 3D model. Includes: 1x HDI 109 sensor head (Blue Led) 1x USB dongle key (Software License) 1x 3D scanning software for Windows 11 X64 1x Traveling case 1x small tripod 1x Cable & Power Supply Performance: Max. resolution 0.08 mm Max. accuracy 0.034 mm Acquisition speed 3,283,000 points/s Dimensions 49 × 100 × 155 mm Weight 1.04 kg Connectivity: Ethernet

The content of the following deal is MP-200 by DIMA. Along with the Pick and Place machine MP-200 , we offer the following with no extra charge  Stencil Paste Printer Go3( Stencil Paste Printer Go3 comes with a Stencil Placement Frame )  Feeders ( SMCS-4008 X 30, SMCS-4208 X 2, SMCS-4024 X 3, SMCS-4012 X 6, SMCS-4016 X 5) Thus, purchasing one Pick and Place machine, we provide the purchaser with a Stencil Paste Printer for the preparation of the PCBs prior to the assembly, a reflow oven for the PCBs, as well as the feeders for the Pick and Place Machine. Machines come with user manuals and extra information footage.