Showing 1 - 20 out of 226
Italy
82
| Type of CNC | |
|---|---|
| Type of back spindle |
| Type of main spindle |
|---|
Belgium
1965
| Table length | 900 mm |
|---|---|
| Manual | Yes |
| CNC type | |
| Wheel width | 400 mm |
| Table width | 300 mm |
|---|---|
| CNC | No |
| Wheel diameter | 350 mm |
| Type of CNC |
|---|
Poland
1970
| Spindle taper |
|---|
| Overhauled | no |
|---|
Bulgaria
1972
| Length between centers | 5000 mm |
|---|---|
| Tailstock | no |
| Overhauled | no |
|---|---|
| Steady | no |
Australia
1977
| X Axis | 6000 mm |
|---|---|
| Z Axis | 900 mm |
| Table width | 2100 mm |
| Spindle diameter | 135 mm |
| Spindle motor power | 37 kW |
| Y Axis | 3000 mm |
|---|---|
| Table length | 1600 mm |
| Piece weight | 15000 kg |
| Max. spindle speed | 810 rpm |
| Overhauled | no |
Poland
1978
| Type | Horizontal |
|---|---|
| Module + | 4 |
| Max spindle speed | 450 rpm |
| Engine Power | 10 kW |
| Max wheel Ø | 160 mm |
|---|---|
| Module - | 0.5 |
| Max gear width | 150 mm |
Portugal
1979
| Type of CNC |
|---|
| Turning length | 3000 mm |
|---|---|
| Type of CNC | Siemens Sinumerik 805 T |
| Tailstock | yes |
| Length between centers | 3000 mm |
|---|---|
| Spindle taper | |
| Bar feeder | no |
Italy
1979
| Length between centers | 1500 mm |
|---|---|
| Ø above the bed | 350 mm |
| Spindle bore | 52 mm |
| Overhauled | no |
| Steady | no |
| Center height | 200 mm |
|---|---|
| Spindle nose | |
| Turning speed | 1600 rpm |
| Tailstock | no |
| Rotary table (4th axis) | no |
|---|---|
| Spindle taper |
| CNC |
|---|
| Spindle taper |
|---|
| Nbr of drilling heads |
|---|
| X axis | 10000 mm |
|---|---|
| Z axis | 2500 mm |
| Table length | 8000 mm |
| Max load on table | 150000 kg |
| Spindle taper | |
| Spindle motor power | kW |
| Y axis | 3950 mm |
|---|---|
| CNC | Yes |
| Table width | 2800 mm |
| Type of CNC | |
| Max. spindle speed | 2000 rpm |
| Max wheel Gear Ø | 3000 mm |
|---|---|
| CNC type | Siemens 840D |
| Module + | 28 |
|---|---|
| Max gear width | 1000 mm |
| X axis | 1100 mm |
|---|---|
| Z axis | 420 mm |
| Spindle taper | |
| Overhauled | no |
| Y axis | 300 mm |
|---|---|
| Table width | 360 mm |
| Spindle motor power | 75 kW |
Germany
1983
| Max wheel Ø | 1200 mm |
|---|---|
| Module - | 0.7 |
| Type of CNC | |
| Engine Power | 1.7 kW |
| Module + | 20 |
|---|---|
| CNC | Yes |
| Max. gear width | 35.4 mm |
Cyprus
India
Ukraine
China
Slovenia
Romania
EN
- Languages
English (EU)
English (GB)
Français
Čeština
Español
Deutsch
Italiano
Polski
Русский
Türkçe
Português
Magyar
Hrvatski
Български
Nederlands
Ελληνικά
Dansk
Svenska
Română
Crpski
Lietuvių